2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 155
Fault effects
- Gear held
- Gears possible in D
- No gear preselection
- Transmission limp-home indication in instrument cluster control unit
Hydraulic Gear Selection: No Or Wrong Shift Rod Is Moved For Change To Neutral Position
P17D3
Diagnosis information - PDK
Hydraulic gear selection: no or wrong shift rod is moved for change to neutral position
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P1731, P1732, P1733, P1734
Possible fault causes
- Clutch faulty
- Hydraulics faulty
Fault setting conditions
Fault effects
- Gear held
- No gear preselection
- Transmission limp-home indication in instrument cluster control unit
Hydraulic Gear Selection: No Or Wrong Shift Rod Moved During Shift Overlap
P17D3
Diagnosis information - PDK
Hydraulic gear selection: No or wrong shift rod moved during shift overlap
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P1731, P1732, P1733, P1734
Possible fault causes
- Clutch faulty
- Hydraulics faulty
Fault setting conditions
- Incorrect shift rod moves by more than 2.2 mm
Fault effects
- Gear held
- Pressure adjusters 5 and 6 depressurized
- Speed limitation to overspeed in 1st gear
- White transmission limp-home indication in instrument cluster
Hydraulic Gear Selection: Shift Rod Was Moved Without Control Request
P17D3
Diagnosis information - PDK
Hydraulic gear selection: shift rod was moved without control request
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
