Recall - Replace A-Pillar Trim
FILE:
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION - PARTS & ACCESSORIES BINDER
Campaign No. 2011010001, March 2011
TO: ALL MERCEDES-BENZ CENTERS
SUBJECT:
Model 906, Model Year 2010
Replace A-Pillar Trim
Daimler AG (DAG), the manufacturer of Mercedes-Benz and Freightliner Sprinter vehicles, has determined that due to documentation error the
A-Pillar Trim installed in the vehicle may not be the correct one required for compliance with Federal Motor Vehicle Safety Standard (FMVSS) 201
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 132
(Head Impact Protection). Dealers will replace the A-Pillar Trim to insure compliance with FMVSS 201.
Prior to performing this Recall Campaign:
^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
^ Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.
Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.
Approximately 2 vehicles are involved.
Procedure
1. Remove A-pillar trim (1, Figure 1) from A-pillar.
2. Install new A-pillar trim (1, Figure 1) in reverse order.
Primary Parts Information
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
