2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 597
Double fault: two faults demand alternative measures with equal priority rating
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Analyse fault cause for faults also entered
Fault setting conditions
- Inadmissible combination of alternative measures
Fault effects
- Emergency hold function
- Transmission limp-home indication in instrument cluster control unit
Input Shaft Overspeed
P1715
Diagnosis information - PDK
Input shaft overspeed
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Speed sensors faulty
- Lines faulty
Fault setting conditions
- Rotational speed of shaft 1 or shaft 2 below threshold value
- Rotational speed of shaft 1 or shaft 2 above threshold value
Fault effects
- No power transmission
- Limp-home message in instrument cluster
With P0604
P1715
Diagnosis information - PDK
PDK control unit, internal fault
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Control unit faulty
Fault setting conditions
- Internal diagnostic routine returns fault
Fault effects
- Power supply switch-off for pressure regulator
- Solenoid valve power supply switch-off
- Hydraulic control is switched off
- Start enable only in position P
