2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 259
Fault setting condition(s)
- Modification Coolant temperature Engine < Nominal value (See [Information])
INFORMATION
Nominal value Modification = depending on Engine start temperature
P0117
P0117
Diagnosis information - Control unit DME (DFI)
Coolant temperature sensor Engine: Electrical fault
Diagnostic conditions
- Ignition on
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines
- Coolant temperature sensor Engine Faulty
Fault setting condition(s)
- Coolant temperature Engine (measured) < -40 锟斤拷C (锟斤拷F) (P0117), at:
- Ignition on or Engine running and
- Intake air temperature > -30 锟斤拷C (-22 锟斤拷F)
or
- Engine running > 300 Second(s)
or
- Coolant temperature Engine (measured) > +130 锟斤拷C (锟斤拷F) (P0118), at:
- Ignition on or Engine running
P0118
P0118
Diagnosis information - Control unit DME (DFI)
Coolant temperature sensor Engine: Electrical fault
Diagnostic conditions
- Ignition on
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines
- Coolant temperature sensor Engine Faulty
Fault setting condition(s)
- Coolant temperature Engine (measured) < -40 锟斤拷C (锟斤拷F) (P0117), at:
- Ignition on or Engine running and
- Intake air temperature > -30 锟斤拷C (-22 锟斤拷F)
or
- Engine running > 300 Second(s)
- Coolant temperature Engine (measured) > +130 锟斤拷C (锟斤拷F) (P0118), at:
- Ignition on or Engine running
P0119
P0119
Diagnosis information - Control unit DME (DFI)
Coolant temperature sensor Engine: Intermittent contact
Diagnostic conditions
- Ignition on
- none of the following faults stored: P0117, P0118
