2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 154
Hydraulic gear selection: Current gear is disengaged and no new gear is engaged during shift overlap (odd target gear)
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P1731, P1732, P1733, P1734
Possible fault causes
- Clutch faulty
- Hydraulics faulty
Fault setting conditions
- Incorrect shift rod moves by more than 2.2 mm
Fault effects
- Gear held
- Only gears 1, 3, 5, 7 and R are possible
- Transmission limp-home indication in instrument cluster control unit
Hydraulic Gear Selection: Implausible Shift Rod Movement (Odd Target Gear)
P17D3
Diagnosis information - PDK
Hydraulic gear selection: implausible shift rod movement (odd target gear)
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P1731, P1732, P1733, P1734
Possible fault causes
- Clutch faulty
- Hydraulics faulty
Fault setting conditions
Fault effects
- Gear held
- Gears possible in D
- No gear preselection
- Transmission limp-home indication in instrument cluster control unit
Hydraulic Gear Selection: Implausible Shift Rod Movement For Automatic Gearshift (Even Target
Gear)
P17D3
Diagnosis information - PDK
Hydraulic gear selection: implausible shift rod movement for automatic gearshift (even target gear)
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P1731, P1732, P1733, P1734
Possible fault causes
- Clutch faulty
- Hydraulics faulty
Fault setting conditions
