2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 684
- Engine speed outside the permissible range
- Selector lever in [P]
- Transmission oil temperature outside the permissible range
- Teach-in cancelled
Fault effects
- Clutches open
- Transmission limp-home display in the instrument cluster control unit
Fault remedy
- Perform calibration
- Engine running
- Selector lever [P]
- Transmission pan temperature >= 60 锟斤拷C (140 锟斤拷F)
Variant Coding Not Valid
P1872
Diagnostic information - PDK
Variant coding not valid
Diagnostic conditions
The control unit first tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are then
tested and any faults are stored.
- Ignition on
Possible fault causes
- Incorrect program and data versions programmed
- Incorrect coding in vehicle order
Fault setting conditions
- Programmed data record is not valid
- Coding in vehicle order is not valid
Fault effects
- No power transmission
- Transmission limp-home display in the instrument cluster control unit
Fault remedy
- Update of the correct program version according to country identifier
- Check of the vehicle order
Software Monitoring, Calculation Of E-shift Position Implausible
P1897
Diagnosis information - PDK
Software monitoring, calculation of E-shift position implausible
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- PDK control unit faulty
Fault setting conditions
- Racing start status without driver request
- Power transmission without driver request
- No shift in spite of driver request
- Displayed position not same as engaged position
Fault effects
- Emergency hold function
- Transmission limp-home indication in instrument cluster control unit
