2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 405
- Oil temperature (Measured value) < -39 锟斤拷C (锟斤拷F), at:
- Engine running > 300 Second(s)
or
- Ignition on or Engine running and
- Coolant temperature > -15 锟斤拷C (锟斤拷F)
- P0198:
- Oil temperature (Measured value) > 159 锟斤拷C (锟斤拷F), at:
- Ignition on or Engine running and
- Coolant temperature Coolant < 110 锟斤拷C (锟斤拷F)
P0201
P0201
Diagnosis information - Control unit DME (DFI)
Injection valve Cylinder 1
Diagnostic conditions
- Engine running
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
P0202
P0202
Diagnosis information - Control unit DME (DFI)
Injection valve Cylinder 2
Diagnostic conditions
- Engine running
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
P0203
P0203
Diagnosis information - Control unit DME (DFI)
Injection valve Cylinder 3
Diagnostic conditions
- Engine running
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
P0204
P0204
Diagnosis information - Control unit DME (DFI)
Injection valve Cylinder 4
Diagnostic conditions
- Engine running
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
