2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 391
tested and any faults are stored.
- Ignition on
- Selector lever in [P]
Possible fault causes
- Transfer error (error in learning process)
Fault setting conditions
- Engine torque outside the permissible range
- Engine speed outside the permissible range
- Selector lever in [P]
- Transmission oil temperature outside the permissible range
- Teach-in cancelled
Fault effects
- Clutches open
- Transmission limp-home display in the instrument cluster control unit
Fault remedy
- Perform calibration
- Engine running
- Selector lever [P]
- Transmission pan temperature >= 60 锟斤拷C (140 锟斤拷F)
Data Record For Calibration Of The Clutch Is Not Valid
P186F
Diagnostic information - PDK
Data record for calibration of the clutch is not valid
Diagnostic conditions
The control unit first tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are then
tested and any faults are stored.
- Ignition on
- Selector lever in [P]
Possible fault causes
- Transfer error (error in learning process)
Fault setting conditions
- Engine torque outside the permissible range
- Engine speed outside the permissible range
- Selector lever in [P]
- Transmission oil temperature outside the permissible range
- Teach-in cancelled
Fault effects
- Clutches open
- Transmission limp-home display in the instrument cluster control unit
Fault remedy
- Perform calibration
- Engine running
- Selector lever [P]
- Transmission pan temperature >= 60 锟斤拷C (140 锟斤拷F)
Variant Coding Not Valid
P186F
Diagnostic information - PDK
Variant coding not valid
Diagnostic conditions
The control unit first tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are then
tested and any faults are stored.
