2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 412
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
P0280
P0280
Diagnosis information - Control unit DME (DFI)
Injection valve Cylinder 7
Diagnostic conditions
- Engine running
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
P0282
P0282
Diagnosis information - Control unit DME (DFI)
Injection valve Cylinder 8
Diagnostic conditions
- Engine running
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
P0283
P0283
Diagnosis information - Control unit DME (DFI)
Injection valve Cylinder 8
Diagnostic conditions
- Engine running
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty
P0298
P0298
Diagnosis information - Control unit DME (DFI)
Oil temperature implausible high
Diagnostic conditions
- Period since engine was started > 10 Second(s)
- Coolant temperature < 70 锟斤拷C (锟斤拷F)
- none of the following faults stored: Coolant temperature or Oil temperature sensor
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit between lines
- Oil cooler damaged or Blocked
- Oil temperature sensor Faulty
Fault setting condition(s)
- Coolant temperature < 70 锟斤拷C (锟斤拷F), at:
- Oil temperature > 110 锟斤拷C (锟斤拷F)
