2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 448
- Thermostat Faulty
P0599
P0599
Diagnosis information - Control unit DME (DFI)
Final stage Thermostat
Diagnostic conditions
- Ignition on
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to ground or open circuit in lines
- Thermostat Faulty
P0601
P0601
Diagnosis information - Control unit DME (DFI)
Control module Faulty
Diagnostic conditions
- Switch on ignition > 10 Second(s)
- then Idle speed > 30 Second(s)
- then engine speed > 1,000 1/min > 60 Second(s), at:
- Vehicle is stationary
- then Driving > 60 Second(s)
Possible fault causes
- Control unit DME (DFI) Faulty
Double Fault: Two Faults Demand Alternative Measures With Equal Priority Rating
P0603
Diagnosis information - PDK
Double fault: two faults demand alternative measures with equal priority rating
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Analyse fault cause for faults also entered
Fault setting conditions
- Inadmissible combination of alternative measures
Fault effects
- Emergency hold function
- Transmission limp-home indication in instrument cluster control unit
Selector lever position implausible
P0603
Diagnosis information - PDK
Selector lever position implausible
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
