2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 236
- Ignition on
- The following faults are not detected: P18C0
Diagnosis Information - PDK
P18C0
Diagnostic information - PDK
Clutch
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P18C0
Diagnosis Information - PDK (Dual-Clutch Transmission)
P18C0
Diagnostic information - PDK
Clutch
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P18C0
Pdiagnosis Information - PDK
P18C5
Diagnostic information - PDK
Clutch @WORT_HOK
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P18C0
Diagnosis Information - PDK (Dual-Clutch Transmission)
P18C5
Diagnostic information - PDK
Clutch
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P18C0
Diagnosis Information - PDK
P18D0
Diagnostic information - PDK
