2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 488
- Limp-home message in instrument cluster
With P0604
P0730
Diagnosis information - PDK
PDK control unit, internal fault
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Control unit faulty
Fault setting conditions
- Internal diagnostic routine returns fault
Fault effects
- Power supply switch-off for pressure regulator
- Solenoid valve power supply switch-off
- Hydraulic control is switched off
- Start enable only in position P
- Limp-home message in instrument cluster
With P0605
P0730
Diagnosis information - PDK
PDK control unit, internal fault
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Control unit faulty
Fault setting conditions
- Internal diagnostic routine returns fault
Fault effects
- Power supply switch-off for pressure regulator
- Solenoid valve power supply switch-off
- Hydraulic control is switched off
- Start enable only in position P
- Limp-home message in instrument cluster
With P0603
P0730
Diagnosis information - PDK
PDK control unit, internal fault
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.