Sunday, December 29, 2019

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 72

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 72



- Engine speed - shaft speed 2 - desired slip > maximum permissible slip



Fault effects



- Gear held



- Moving off in 3rd gear



- Only gears 1, 3, 5 and 7 are possible



- Transmission limp-home indication in instrument cluster control unit



Diagnosis Information - PDK (Dual-Clutch Transmission)



P17BE



Diagnosis information - PDK



Clutch 2 cannot be opened during shift overlap



Diagnostic conditions



The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are



then tested and any faults are stored.



- Ignition on



Possible fault causes



- Clutch faulty



- Hydraulics faulty



Fault setting conditions



- Tolerance value exceeded



Fault effects



- Transmission limp-home indication in instrument cluster control unit



Clutch 1 Blocks For POS N/P Or D/R



P17B1



Diagnostic information - PDK



Clutch 1 blocks for POS N/P or D/R



Diagnostic conditions



The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are



then tested and any faults are stored.



- Ignition on



- The following faults are not detected: P0843, P181A



- The following faults are not detected: P1706, P1707



Fault effects



- Only gears 2, 4 and 6 are possible



- Transmission limp-home indication in instrument cluster control unit



Clutch 2 Blocks For POS N/P Or D/R



P17B1



Diagnostic information - PDK



Clutch 2 blocks for POS N/P or D/R



Diagnostic conditions



The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are



then tested and any faults are stored.



- Ignition on



- The following faults are not detected: P0843, P181A



- The following faults are not detected: P1706, P1707



Fault effects



- Only gears 1, 3, 5 and 7 are possible



- Transmission limp-home indication in instrument cluster control unit



Clutch 1 Cannot Be Opened