Body - Load Compartment Sliding Door Arrester Inoperative
Load compartment sliding door arrester inoperative
Topic number LI72.16-N-048763
Version 1
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898) Page 54
Design group 72.16 Sliding doors
Date 02-01-2010
Validity 906.6## - 906.7##
Reason for change
Reason for block
Complaint:
When open, the load compartment sliding door does not lock in the end position.
Cause:
The position of the arrester at the bottom of the C-pillar prevents it from engaging in the lower sliding carriage of the load compartment sliding door.
The lower sliding carriage does not engage in the arrester.
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 55
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 56
Remedy:
Loosen the arrester and fit two washers at the upper threaded connection (only) between the bodywork and the arrester (see attachment). The bolts
must be tightened to a torque of 13 Nm.
Preparatory work: Remove step as described in WIS AR 72.16-D-7816A.
Do not replace any parts.
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Body/Paint - Sliding Door Rail Paint Damage Under End Cap
Paint damage on bead underneath end
cap of load compartment sliding door rail
Topic number LI98.00-N-048765
Version 1
Design group 98.00 General
Date 02-04-2010
Validity Model 906.6 and 906.7
Reason for change
Reason for block
Complaint:
Paint damage underneath end cap of load compartment sliding door rail.
Cause:
When the load compartment sliding door is actuated or due to vibrations while driving, the end cap of the load compartment sliding door rail can
collide with the raised panel line of the side wall.
Remedy:
Touch up paint damage with a touch-up paint pen.
Partially remove load compartment sliding door rail near the end cap.
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 36
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 37
Attach Teflon underlay.
Body - Sliding Door Cable Track Excess Resistance/Cracked/Noise
Cable track of load compartment sliding door has
excessive resistance/ is cracked/ makes noises
Topic number LI72.16-N-048764
Version 1
Design group 72.16 Sliding doors
Date 02-18-2010
Validity MODEL 906.6## - 906.7##
Reason for change
Reason for block
Complaint:
The load compartment sliding door catches or is difficult to operate.
The cable track of the load compartment sliding door is cracked, resulting in noises.
Cause:
Dirt from the cargo area (e.g. stones, packaging waste) gets jammed in the movement radius of the cable track, restricting the movement of the cable
track. The cable track can crack.
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 49
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 50
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 51
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 52
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 53
Remedy:
In order to minimize the amount of dirt entering the area of the load compartment sliding door cable track and to avoid damage to the cable track, a
foam section should be glued onto the load compartment sliding door (see attachment). The length of the foam section should be made to fit the
width of the load compartment sliding door.
^ Make sure that all foreign objects under the step are removed (vacuumed out). The cable track must be able to move properly.
^ Dirt and dust can also settle under the film on the floor panel below the cable track (see picture 10 and 11 in attachment). This area must also be
cleaned entirely.
It is not necessary to remove the door for this work!
Note:
The cable track must not be greased.
Check the setting of the lower sliding carriage and correct it if necessary.
Body - Gap Dimensions On Sliding And Rear-End Door
Date: February 22, 2011
Order No.: V-B-72.00/02
Group: 72
SUBJECT:
MY-All, Model 906
Gap Dimensions on Sliding and Rear-End Door
If adjustments are made to sliding and rear-end doors on this model, the below forms must be including in a warranty claim.
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 3
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 4
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 5
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 6
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 7
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 8
Reference the WIS documents shown.
^ Sliding door gap dimensions BE60.00-N-1007-01C
^ Rear-end door gap dimensions BE60.00-N-1009-01C
