Sunday, September 29, 2019

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 120

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 120



- The following fault is not detected: P1706



- The following fault is not detected: P1707



Possible fault causes



- Hydraulic control unit faulty



Fault setting conditions



- No shift rod moves



- Incorrect shift rod moves by more than 1.5 mm



Fault effects



- Pressure regulator 5 switch-off



- Pressure regulator 6 switch-off



- Engaged gear is held until vehicle stops.



- Only gearshifts in D possible



- Transmission limp-home indication in instrument cluster control unit



Hydraulic Emergency Hold Function Cannot Be Cancelled Due To Mechanical Blockage



P17DA



Diagnosis information - PDK



Hydraulic emergency hold function cannot be cancelled due to mechanical blockage



Diagnostic conditions



The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are



then tested and any faults are stored.



- Ignition on



Possible fault causes



- Clutch faulty



- Hydraulics faulty



Fault setting conditions



- Tolerance value exceeded



Fault effects



- Deactivate all pressure regulators



- Emergency hold function



- Transmission limp-home indication in instrument cluster control unit



Hydraulic Emergency Hold Function, Clutch 1 Cannot Be Opened



P17DA



Diagnosis information - PDK



Hydraulic emergency hold function, clutch 1 cannot be opened



Diagnostic conditions



The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are



then tested and any faults are stored.



- Ignition on



Possible fault causes



- Clutch faulty



- Hydraulics faulty



Fault setting conditions



- Tolerance value exceeded



Fault effects



- Only gears 2, 4 and 6 are possible



- No reverse gear



- No gear preselection



- Transmission limp-home indication in instrument cluster control unit



Hydraulic Emergency Hold Function, Clutch 2 Cannot Be Opened